Hayata BT-200 – Easy One-hand Operation
The BT-200 is a lightweight manual ratchet tool design which reduces installer fatigue when installing banding. It is easy to load and easy to remove excess material. The three way handle allows for one or two hand operation. It also has Heavy Duty Zinc plated construction for maximum corrosion resistance.
Hayata Tough Tool – TT2400
This tensioning tool with built in cutter provides up to 2400 lbs of tension and can be used on band, free end clamps, fix band and coated band. Powder coat finish helps protect the tool from corrosion.
Hayata Gorilla Tool – GT6000
Designed to be used with heavy duty band or applications where 6000 lbs of torque may be required.
Ratchet Tool to be used with Stainless Steel Banding both Coated and Uncoated. Longer Ratchet lever allows for manual tensioning to the desired amount. To cut off excess strap push the Shorter Ratchet Lever downward.
Hayata Punch Tool – PT500
Allows for tensioning and punch locking band.
Hayata JR Tool – JR100
Can be used on 1/4” to 3/8” wide band and free end clamps. This tool tensions and cuts.
Push Bar Tensioner – PB6-020
Can be used with “Closed Seals” for 3/8” – 3/4” x .020 (max thickness) steel banding. Great for use with round, irregular, or non-compressible packages.
|TT2400||4.5 lbs||2||1 Box|
|GT6000||11 lbs||5||1 Box|
|PT500||3.4 lbs||1.5||1 Box|
|JR100||1.1 lbs||0.5||1 Box|
|RT400||3.0 lbs||1.4||1 Box|
|PB6-020||3.0 lbs||1.4||1 Box|